reference information b-131 programmable controller cj1 dimensions note: all dimensions are shown in mm. divide by 25.4 to convert millimeters into inches. j cj1 product dimensions unit/product model number width power supply unit cj1w-pa205r 80 power supply unit cj1w-pa202 45 p p y cj1w-pd025 60 cpu unit cj1m-cpu11/12/13 31 cj1m-cpu21/22/23 49 cj1h-cpu jjj cj1g-cpu jjj 62 end cover cj1w-ter01 14.7 j example rack widths using cj1w- pa202 power supply unit (ac, 14 w) no.ofunits t d i t h rack width (mm) mounted with 31-mm width with cj1m- cpu12/13 with cj1m- cpu22/23 with cj1g or cj1h cpu unit 1 121.7 139.7 152.7 2 152.7 170.7 183.7 3 183.7 201.7 214.7 4 214.7 232.7 245.7 5 245.7 263.7 276.7 6 276.7 294.7 307.7 7 307.7 325.7 338.7 8 338.7 356.7 369.7 9 369.7 387.7 400.7 10 400.7 418.7 431.7 cj1m-cpu11/12/13 cj1m-cpu21/22/23
reference information b-132 programmable controller cj1 dimensions note: all dimensions are shown in mm. divide by 25.4 to convert millimeters into inches. j units of width 20 mm unit model number width i/o control module cj1w-ic101 20 32basic-point i/o modules cj1w-id231/232 p / cj1w-od231/232 b7a interface unit cj1w-b7a22 cj1w-b7a14 cj1w-b7a04 compobus/s master module cj1w-srm21 i/o control unit 32 - point i/o units (cj1w-id23 j /od23 j ) units of width 31 mm unit model number width i/o interface module cj1w-ii101 31 8/16-point basic i/o modules cj1w-id201 cj1w-id211 cj1w-ia111/201 cj1w-od201/202/203/204 CJ1W-OD211/212 cj1w-oc201/211 cj1w-oa201 32-point basic i/o m o d u l e s cj1w-md231 c j 1 w m d 2 3 2 m o d u l e s c j 1 w - m d 2 3 2 cj1w-md233 64-point basic i/o modules cj1w-id261 cj1w-id262 cj1w-od261 cj1w-od262 cd1w-md262 cj1w-od263 cd1w-md261 cd1w-md263 cd1w-md563 interrupt input module cj1w-int01 high speed input module cj1w-idp01 analog i/o module cj1w-ad jjj cj1w-da jjj cj1w-mad42 temperature control units cj1w-tc jjj position control units cj1w-nc113/133 cj1w-nc213/233 cj1w-nc413/433 high-speed counter unit cj1w-ct021 id sensor unit cj1w-v600c11 cj1w-v600c12 controller link module cj1w-clk21-v1 serial communications unit cj1w-scu41 ethernet module cj1w-etn21 devicenet module cj1w-drm21 profibus-dp slave cj1w-prt21 profibus-dp master cj1w-prm21
reference information b-133 programmable controller cj1 dimensions i/o interface unit 8/16-point basic i/o units, interrupt input unit, and high-speed input unit 64-point basic i/o units and 32-point basic i/o units (cj1w-md23 j ) special i/o units and cpu bus units j mounting dimensions din track model number a pfp-100n2 16 mm pfp-100n 7.3 mm pfp-50n 7.3 mm j mounting height the mounting height of cj1 series cpu racks and expansion racks is from 81.6 to 89.0 mm, depending on the modules that are mounted. additional height is required to connect programming devices (e.g., cx-programmer or programming console) and cables. be sure to allow suffi- cient mounting height. approx. 100 to 150 mm 81.6 to 89.0 mm note: consider the following points when expanding the configuration: ? the total length of i/o connecting cable must not exceed 12 m. ? i/o connecting cables require the bending radius as indicated in the cs/cj-series connecting cable. cs/cj-series connecting cable note: outer diameter of cable: 8.6 mm. r R 69 mm
reference information b-134 programmable controller cj1 cj1 system configuration worksheets j worksheet 1 cpu rack required parts qty. part number(s) selected cpu -- note: cj1m-cpu1 j requires 0.58 a, cj1m-cpu2 j requires 0.64 a, cj1g requires 0.91 a, sj1h requires 0.99 a 1 module current consumption description 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 cj1w - ic101 0.02 a at 5v if cj1 modules exceed ten per system, an additional rack is required. the cj1w will attach to a cj1w-ii101 in the expansion rack. totals: power supply: 1 optional parts memory card (flash) programming cable (peripheral cable) cx-programmer programming software remote i/o touch screens/cables/term inal blocks/other software/etc. note: make copies of this worksheet for system configuration and planning.
reference information b-135 programmable controller cj1 cj1 system configuration worksheets j worksheet 2 expansion rack #_____ required parts qty. part number(s) selected i/o expansion cables (cs1w-cn jj 3) 1 cs1w-cn _________ i/o expansion module cj1w-ii101 (current consumption 0.13 a at 5v) 1 cj1w-ii101 module current consumption description 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 1 cj1w -i c101 0.02 a at 5v if cj1 modules exceed ten per system, an additional rack is required. the cj1w will attach to a cj1w-ii101 in the expansion rack. totals: power supply: other note: make copies of this worksheet for system configuration and planning.
|
